Comes with new strap.  Makes no difference whether your metal arm cuff cover is the old style with no snaps or the new style with snaps.  This cover attaches with included VELCRO® type hook and loop adhesive tabs.

 Your arm will thank you!

The post SD/GP/GPX Arm Cuff Cover with new Strap appeared first on Doc's Detecing Supply.

You can buy the entire Cover Package which includes the Control Head Cover and the arm cuff cover, a new strap and the shade cover.  Use the ADD TO CART Option drop down.

This package offers protection for your machine as well as comfort for your arm.
• Tough Canvas exterior
• Thin neoprene lining offers insulation from direct sunlight and cushion to protect your detector
• Arm Cuff comes with brand new strap or use the strap you have and keep new one for a spare
• Back of head cover offers a mesh panel over your speaker to let the sound out, and not muffle it
• Good custom fitted cover, not some ill fitted nylon bag
• Elastic band to make sure your charging cable stays put
• Removal Shade Cover

We have gotten 100% positive reviews on Ebay for this Cover Set.  Buy it, use it for 30 days, if you don’t like it you are welcome to return pre-paid for a refund less the shipping cost you paid to initially send it to you.

* IMPORTANT INSTALLATION INSTRUCTIONS:

To perfectly align the holes of the cover over the button you must use the supplied hook and loop, type tabs.

The holes were very hard to work with.  At first we tried a long slit, but that made the cover fit loosely because the slit spread open.

We found the solution was to use the two small holes and the hook and loop gripping material.  Stitched inside the cover below the holes are two pieces of Loop material, or could be hook, one on each side under the button holes.  Attached to those are two removable adhesive backed pieces of the opposing material, either hook or loop.

Start with the cover off of the machine.  Take the two adhesive backed pieces of hook or loop, whichever was provided.  Peel the back off and place one piece 1/4 inch under the lower of the two buttons on one side of the detector.  Do the same for the other side, 1/4 inch below the bottom button.

Start putting the cover on the detector, but stop where the stitched hook and loop tab on the cover gets about over the buttons.  At this point you will want to use a two narrow, flat, smooth objects to shove between the cover and the detector on the sides.  I used butter knives, actually I used the plastic disposal type of butter knifes, because they were light weight.  You may have received two wooden popsicle type sticks in your package to assist you in positioning the holes in the cover over the buttons correctly.

The purpose of the knife  is to cover the hook and loop that you have adhered to your machine, and allow the hook and loop that is stitched inside the cover to easily slide past one another until you are ready to position the holes and get them aligned perfectly.

Continue to slide the cover on, once it is all the way on you will have the two knifes sticking out of the sides of the cover.  You will want to gently withdraw them one at a time just to the point where you can see the button through the holes.  Do one side at a time.  Do not withdraw the knifes any further than where you can just see the buttons through the holes, or the hook and loop will stick to each other and prevent you from aligning the holes properly.

Working with one side at a time, position the holes perfectly over the buttons.  Once the holes are perfectly aligned on the first side, slowly withdraw the butter knife, and push the hook and loop, that is right below the buttons, so that it grips the hook and loop that you have attached to your machine.  This will secure the alignment of the holes over the buttons and should eliminate any frustration with mis-alignment of the holes.  Repeat the process for the other side of the detector, position the holes over the buttons and then slowly withdraw the butter knife, check the alignment and then push the hook and loop stitched tab down to grip the tabs that you placed on your machine.

Let me know how that works for you.  Thank you, Doc

Equinox Complete Cover Package: Grey Digi Camo Control Head And Arm Cuff Cover $59.95
Equinox Control Head Cover ONLY $48.95
Equinox Arm Cuff Cover ONLY  $22.95

Equinox Covers

Use this Drop Down and ADD TO CART
For INTERNATIONAL ORDERS ONLY use this drop down Flat Rate Shipping $23

U.S. ORDERS Use Last ADD TO CART

The post EQUINOX 600/800 Grey Digital Camo Cover Set appeared first on Doc's Detecing Supply.

Rusty from Garret Special FREE SHIPPING  Expires Nov 30, 2023

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

5 Piece Cover Set.  Detachable Shade Cover, Head Cover, Main Body Cover, Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap.  Mesh Speaker section allow clear sound from the built in speaker.

• Easily access the alkaline battery pack to thread the cords if necessary.

• Flaps keep the dirt out and protect your detector when you are not using the cords from the Alkaline battery pack.

• I love this feature!  The bottom of the main cover has a single ply super tough single ply conveyor belt material.  This protects the bottom of your detector.  Not only that, but you can easily clean the bottom by wiping with a damp cloth before storing your detector.

Thank you to customer Jennifer Bond for these pictures.




 

The post AXIOM COVER – RUSTY appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

4 Piece Cover Set.  Detachable Shade Cover, Head Cover,  Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.  Thin neoprene protects your detector from direct sunlight that can cause the detector to overheat and have screen black out.

• NEVER! NEVER! NEVER! Buy a BLACK COVER or a cover that does not use an insulated lining or speaker mesh.  Black or dark fabric covers that do not provide adequate heat protection and ventilation can be harmful to your machine. 

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap. 

• Easily access the connection points in rear. Elastic band to hold charging cable in place.  Mesh over speaker to provide clear undistorted sound.  The mesh is also very important to keep the detector ventilated to avoid overheating. Cover does not obstruct flashlight like some cheap covers.

If you find a better well made, feature rich cover than Nugget Stalker® Brand, I recommend you buy it.

The post Xterra Pro Cover Set, Doc’s Nugget Stalker Brand® appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

4 Piece Cover Set.  Detachable Shade Cover, Head Cover,  Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.  Thin neoprene protects your detector from direct sunlight that can cause the detector to overheat and have screen black out.

• NEVER! NEVER! NEVER! Buy a BLACK COVER or a cover that does not use an insulated lining or speaker mesh.  Black or dark fabric covers that do not provide adequate heat protection and ventilation can be harmful to your machine. 

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap. 

• Easily access the connection points in rear. Elastic band to hold charging cable in place.  Mesh over speaker to provide clear undistorted sound.  The mesh is also very important to keep the detector ventilated to avoid overheating. Cover does not obstruct flashlight like some cheap covers.

If you find a better well made, feature rich cover than Nugget Stalker® Brand, I recommend you buy it.

The post Equinox 700 / 900 Cover Set, Doc’s Nugget Stalker® Brand appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

4 Piece Cover Set.  Detachable Shade Cover, Head Cover,  Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.  Thin neoprene protects your detector from direct sunlight that can cause the detector to overheat and have screen black out.

• NEVER! NEVER! NEVER! Buy a BLACK COVER or a cover that does not use an insulated lining or speaker mesh.  Black or dark fabric covers that do not provide adequate heat protection and ventilation can be harmful to your machine. 

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap. 

• Easily access the connection points in rear. Elastic band to hold charging cable in place.  Mesh over speaker to provide clear undistorted sound.  The mesh is also very important to keep the detector ventilated to avoid overheating.

If you find a better well made, feature rich cover than Nugget Stalker® Brand, I recommend you buy it.

The post Cover Set for your Manticore Metal Detector Highest Quality, Nugget Stalker® Brand appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

5 Piece Cover Set.  Detachable Shade Cover, Head Cover, Main Body Cover, Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap.  Mesh Speaker section allow clear sound from the built in speaker.

• Easily access the alkaline battery pack to thread the cords if necessary.

• Flaps keep the dirt out and protect your detector when you are not using the cords from the Alkaline battery pack.

• I love this feature!  The bottom of the main cover has a single ply super tough single ply conveyor belt material.  This protects the bottom of your detector.  Not only that, but you can easily clean the bottom by wiping with a damp cloth before storing your detector.

The post Nugget Stalker Brand® Highest Quality Cover Set for Garrett AXIOM Detector appeared first on Doc's Detecing Supply.

So you finally got your new GPX6000 machine in your sweaty little hands. $6000 for this amazing little piece of technology and you’re just going to let it lay around in the dirt? No! Of course not! You’re going order one of Doc’s Nugget Stalker® Brand covers. Head cover, removable shade over Main body cover, arm cuff cover and strap. (5 pieces total)  The entire cover package only weighs 8.5 ounces. Removable Shade cover makes the screen easier to see.

This amazingly well made durable cover has single ply conveyor belt material on the bottom to insure durability and easy cleanup.  Just wipe off with a damp rag.  Elastic stabilizer band to hold coil cable securely in place.

Easy access to remove or insert battery.

NOW AVAILABLE!
In Aussie Green Digital Camo

U.S. ORDERS ONLY! Use this ADD TO CART Button. GPX6000 Cover Set 5 Pieces plus new arm cuff cover strap.  $15 flat rate plus $1 insurance shipping in U.S.

USA ORDERS ONLY! Nugget Stalker® Brand GPX6000 Cover Set Blue Camo $134.95 Green Camo $149.95 plus $15 insurance $1 s&h

5 Piece GPX6000 Cover Set

USA ORDERS Flat Rate S&H $15 plus $1 insurance
SELECT Blue or Green Camo from Drop Down

The post GPX6000 Nugget Stalker® Brand Protective Cover Set Green or Blue Camo appeared first on Doc's Detecing Supply.

But Doc has the solution to that problem.  Doc’s GoldStalker Brand Padded Arm Cuff Cover.

The post GoldStalker Arm Cuff Cover for CTX3030 or GPZ7000 – You Get Padded Comfort appeared first on Doc's Detecing Supply.

The interior bottom is reinforced with 2 inch wide Nylon Belting to protect the “feet” of your detector.

The post Padded Canvas Control Box Cover for Minelab SD/GP/GPX Machines appeared first on Doc's Detecing Supply.