Protect your new Gold Monster 2000 Metal Detector.  A $2000 detector shouldn’t be naked.

Set includes the

• Head Cover
• The Removeable Sun Visor
• The Cord Wrap,
• Arm Cuff Cover,
• Arm Cuff Cover Strap
• NEW Battery Tube Cover.

The post Gold Monster 2000 6 Piece Cover Set NEW! appeared first on Doc's Detecing Supply.

SPECIAL OFFER – Buy Now and get a $36.95  QWIPPLE™ Bungee FREE.

AMAZING VALUE Doc’s Professional Detecting Harness Retail $73.95
QWIPPLE™ Bungee $36.95

TOTAL RETAIL VALUE:  $110.90  

ALL THIS FOR
$59.95 plus s&h and sales tax in Nevada

This is a Limited Time Limited Stock offer.  Get yours before they sell out!

The post Heavy Duty Professional Detecting Harness for SD/GP/GPX machines and QWIPPLE™ Bungee appeared first on Doc's Detecing Supply.

Scan the Code to watch a video of directions and explanation
of the Nugget Stalker® Fatigue Fighting DALAS™ Products or Click
the link:  Nugget Stalker® DALAS™ Video

Got a favorite hydration pack or small backpack with a sternum strap? Well the DALAS™ Stick was made for you! Get ready to make your heaviest detector float like a feather. Simple, comfortable, effective. Comes with the exclusive QWIPPLE™ bungee. DALAS™ stands for Detector Air Lift Assist System. The SYSTEM can consist of the STICK and a STRAP, which is essentially a harness, that you can supply, or we have an optional DALAS™ STRAP (Harness) fashioned after the Ultra Swingy Thingy.

The DALAS Stick was designed with ergonomics, physics, and comfort in mind. The paddle slips into the back of your pants in the middle of your back. The fully adjustable rod can be adjusted for right- or left-handed use. Adjustment for width and height are easily accommodated via threaded adjustments. The rod runs from the paddle then up alongside your rib cage and the ring sits about shoulder high, allowing easy attachment of the black bungee clip. The SLIDE CLIP is an essential part of this design. The slide clip attaches to your sternum strap. This slide clip allows the DALAS Stick to effectively transfer the weight of your detector down and redirects it back to the paddle. It is essential for any device that claims to effectively transfer weight, to be independent of any obstruction.

If you are using a device that attaches to a backpack or “D” ring on your backpack, and it has no way to move independently of that attachment, chances are good it is not going to be effective. If such a device is not perfectly adjusted, it can ultimately end up pulling on the shoulder strap of your harness and the weight is transferred to your shoulder and neck area. The DALAS Stick is designed to transfer the weight efficiently. The weight is applied at the attachment ring at your shoulder via the bungee. It is able to move freely via the SLIDE CLIP. The weight goes down and is redirected backwards. The result is that weight re-direction is terminated by just pushing your belt out and away from your back. You never feel the weight of the detector and the DALAS Stick never allows that weight transfer to be disrupted.

Doc’s Detecting Supply is proud to announce new offerings to the Nugget Stalker® Brand detecting line of accessories. These new items are designed to Fight Detecting Fatigue. When you are more comfortable swinging your detector, you can detect longer, enjoy the hunt, and actually find more goodies. Pain, fatigue and discomfort when metal detecting cause loss of concentration and put simply, makes detecting less fun.

All of these originally designed exclusive Doc’s Nugget Stalker® Brand accessories are designed to Make Detecting Fun Again! ™

In 1993 Doc invented the original Swingy Thingy®. This innovative product was designed to take the weight off your arm when detecting. By means of a uniquely designed bungee, for the first time ever, a detectorist was able to instantaneously adjust the length of the bungee; even in mid-swing. In the first two years, Doc sold over 18,000 Swingy Thingys®.

Well times have changed and it’s time for the Nugget Stalker® Swingy Thingy® Version 2.0. Improvements: New Design, padded strap, Ambi Dexterous, and Qweegle™ Bungee included. Simple, effective. Perfect for lite-weight detectors.

Padded strap goes over right or left shoulder depending on your preference. Green two inch strap attaches to the back of your pants with an Alligator Suspender clamp. One inch strap goes under the arm opposite where the padded strap is. The one-inch strap centers the “O” ring in the middle of your chest and keeps the padded strap from sliding off of your shoulder. The Qweegle™ bungee allows you to adjust the length of the bungee at the snap that goes on the “O” ring or on the rod attachment device. You can easily lay your detector down and detach yourself from the bungee cord by pulling the bungee out of the rod adjustment device through the slide slit. This leaves the bungee attached to the Swingy Thingy® and not lying in the dirt.

A. Order the SAGA™, Swing Assist Guide Arm at: Order Your SAGA™ Swing Assist Guide Arm

B. Order the Gold Spot – GSpot™ Scoop(s) at: GoldSPOT™ – GSpot™ Scoop Order Here Green or Yellow

C. You can Order Gold Pit – GPit™ Scoop(s) at: Order Gold Pit™ – GPit™ Scoop(s) Green or Blue Here

ORDER OTHER Doc’s Fatigue Fighting Items from the Drop Down List Below s&h added at Check Out.

1. DALAS™ Rod with Qwipple™ Bungee Retail $149.95 – Intro Offer: $134.95
2. DALAS™ Harness with Qwipple™ Bungee ONLY No Rod Retail $89.95 – Intro Offer: $64.95
3. DALAS™ HARNESS, ROD and Qwipple™ Bungee COMBO Retail $228.95 – Intro Offer: $169.95
4. SWINGY THINGY® Version 2.0 with QWEEGLE™ Bungee Retail $54.95 – Intro Offer: $39.95
5. QWEEGLE™ Bungee Only Retail $29.95 – Discounted $24.95
6. QWIPPLE™ Bungee with stitch on O Ring Retail $36.95 – Discounted $29.95

The post GPAA Ad 2025 DALAS™ All Anti-Fatigue Products appeared first on Doc's Detecing Supply.

Comes with new strap.  Makes no difference whether your metal arm cuff cover is the old style with no snaps or the new style with snaps.  This cover attaches with included VELCRO® type hook and loop adhesive tabs.

 Your arm will thank you!

The post SD/GP/GPX Arm Cuff Cover with new Strap appeared first on Doc's Detecing Supply.

3 Nugget Stalker® Nugget Stash for $15 and FREE SHIPPING in the U.S.

Useful for Gold Nuggets, Coins, Medication, anything you want to keep safe and have easy access to.

Bright Yellow so it’s easy to find if you drop it.  Just squeeze the edges of the top of the Nugget Stash and it pops open.  Push the top opening together to close it securely.

You’ll love the convenience and unique design.

Don’t be surprised when your friends want to try and latch on to yours.  Makes great inexpensive but useful gifts for your hunting partners.

Sorry no International Shipping Available Yet.  We will make this available on Ebay for our International Customers.

The post Nugget Stalker® Nugget Stash NEW Gold Nugget Holder appeared first on Doc's Detecing Supply.

You can buy the entire Cover Package which includes the Control Head Cover and the arm cuff cover, a new strap and the shade cover.  Use the ADD TO CART Option drop down.

This package offers protection for your machine as well as comfort for your arm.
• Tough Canvas exterior
• Thin neoprene lining offers insulation from direct sunlight and cushion to protect your detector
• Arm Cuff comes with brand new strap or use the strap you have and keep new one for a spare
• Back of head cover offers a mesh panel over your speaker to let the sound out, and not muffle it
• Good custom fitted cover, not some ill fitted nylon bag
• Elastic band to make sure your charging cable stays put
• Removal Shade Cover

We have gotten 100% positive reviews on Ebay for this Cover Set.  Buy it, use it for 30 days, if you don’t like it you are welcome to return pre-paid for a refund less the shipping cost you paid to initially send it to you.

* IMPORTANT INSTALLATION INSTRUCTIONS:

To perfectly align the holes of the cover over the button you must use the supplied hook and loop, type tabs.

The holes were very hard to work with.  At first we tried a long slit, but that made the cover fit loosely because the slit spread open.

We found the solution was to use the two small holes and the hook and loop gripping material.  Stitched inside the cover below the holes are two pieces of Loop material, or could be hook, one on each side under the button holes.  Attached to those are two removable adhesive backed pieces of the opposing material, either hook or loop.

Start with the cover off of the machine.  Take the two adhesive backed pieces of hook or loop, whichever was provided.  Peel the back off and place one piece 1/4 inch under the lower of the two buttons on one side of the detector.  Do the same for the other side, 1/4 inch below the bottom button.

Start putting the cover on the detector, but stop where the stitched hook and loop tab on the cover gets about over the buttons.  At this point you will want to use a two narrow, flat, smooth objects to shove between the cover and the detector on the sides.  I used butter knives, actually I used the plastic disposal type of butter knifes, because they were light weight.  You may have received two wooden popsicle type sticks in your package to assist you in positioning the holes in the cover over the buttons correctly.

The purpose of the knife  is to cover the hook and loop that you have adhered to your machine, and allow the hook and loop that is stitched inside the cover to easily slide past one another until you are ready to position the holes and get them aligned perfectly.

Continue to slide the cover on, once it is all the way on you will have the two knifes sticking out of the sides of the cover.  You will want to gently withdraw them one at a time just to the point where you can see the button through the holes.  Do one side at a time.  Do not withdraw the knifes any further than where you can just see the buttons through the holes, or the hook and loop will stick to each other and prevent you from aligning the holes properly.

Working with one side at a time, position the holes perfectly over the buttons.  Once the holes are perfectly aligned on the first side, slowly withdraw the butter knife, and push the hook and loop, that is right below the buttons, so that it grips the hook and loop that you have attached to your machine.  This will secure the alignment of the holes over the buttons and should eliminate any frustration with mis-alignment of the holes.  Repeat the process for the other side of the detector, position the holes over the buttons and then slowly withdraw the butter knife, check the alignment and then push the hook and loop stitched tab down to grip the tabs that you placed on your machine.

Let me know how that works for you.  Thank you, Doc

Equinox Complete Cover Package: Grey Digi Camo Control Head And Arm Cuff Cover $59.95
Equinox Control Head Cover ONLY $48.95
Equinox Arm Cuff Cover ONLY  $22.95

Equinox Covers

Use this Drop Down and ADD TO CART
For INTERNATIONAL ORDERS ONLY use this drop down Flat Rate Shipping $23

U.S. ORDERS Use Last ADD TO CART

The post EQUINOX 600/800 Grey Digital Camo Cover Set appeared first on Doc's Detecing Supply.

Read Kevin’s 7 page Field Test from the GPAA Jan. Feb 2024 Magazine in the link below.  START 2024 off right with quality Nugget Stalker® products from Doc.  Make 2024 your most productive year ever !

READ GPAA Kevin Hoagland’s 7 Page Field Test

Watch Kevin’s video explaining the use of these amazing products in the YouTube video  below:

Get The following:

STANDARD PACKAGE

1 Ultra Swingy Thingy®, 1 Qwipple™ Bungee Included FREE,
1 Gold Pit™ Scoop, 1 SAGA™ Swivel Assist Guide Arm,
Next three items FREE: 1 Web Utility Belt, 1 Treasure Scoop Pouch, 1 Pick Holder and Shipping:
Total $241.70 ALL THIS FOR $156.85

EXTRA PACKAGE

OR Add 1 EXTRA Qwipple™ and Gold Pit™ Scoop to above.

1 Ultra Swingy Thingy®, 1 Qwipple™ Bungee Included FREE,
(1 EXTRA Qwipple™ Bungee, 1 Extra Gold Pit™ Scoop,)
1 Gold Pit™ Scoop, 1,  SAGA™ Swivel Assist Guide Arm,
Next three items FREE: 1 Web Utility Belt, 1 Treasure
Scoop Pouch, 1 Pick Holder and Shipping:
Total $286.70 ALL THIS FOR $201.85

8.375% sales tax in Nevada on merchandise, shipping excluded from sales tax.

Fully Adjustable Web Utility Belt, Doc’s Scoop Treasure Pouch,
Doc’s Pick Holder.

Specify Color of Scoops in
ADD TO CART Drop Down!!!

The post Kevin Hoagland’s GPAA Field Test Anti-Fatigue Packages appeared first on Doc's Detecing Supply.

Rusty from Garret Special FREE SHIPPING  Expires Nov 30, 2023

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

5 Piece Cover Set.  Detachable Shade Cover, Head Cover, Main Body Cover, Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap.  Mesh Speaker section allow clear sound from the built in speaker.

• Easily access the alkaline battery pack to thread the cords if necessary.

• Flaps keep the dirt out and protect your detector when you are not using the cords from the Alkaline battery pack.

• I love this feature!  The bottom of the main cover has a single ply super tough single ply conveyor belt material.  This protects the bottom of your detector.  Not only that, but you can easily clean the bottom by wiping with a damp cloth before storing your detector.

Thank you to customer Jennifer Bond for these pictures.




 

The post AXIOM COVER – RUSTY appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

4 Piece Cover Set.  Detachable Shade Cover, Head Cover,  Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.  Thin neoprene protects your detector from direct sunlight that can cause the detector to overheat and have screen black out.

• NEVER! NEVER! NEVER! Buy a BLACK COVER or a cover that does not use an insulated lining or speaker mesh.  Black or dark fabric covers that do not provide adequate heat protection and ventilation can be harmful to your machine. 

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap. 

• Easily access the connection points in rear. Elastic band to hold charging cable in place.  Mesh over speaker to provide clear undistorted sound.  The mesh is also very important to keep the detector ventilated to avoid overheating. Cover does not obstruct flashlight like some cheap covers.

If you find a better well made, feature rich cover than Nugget Stalker® Brand, I recommend you buy it.

The post Xterra Pro Cover Set, Doc’s Nugget Stalker Brand® appeared first on Doc's Detecing Supply.

There are no better covers made for your expensive metal detector than Doc’s Nugget Stalker® Brand.

More expensive than other covers? Absolutely!  That’s because it’s made better than any cover on the market.  This is a well designed well fitted cover, not some sloppy bag someone sewed on their home sewing machine.  Nugget Stalker® covers have a number of detectorist friendly features.

This cover more than pays for itself by just protecting the re-sale value of your valuable detector.

4 Piece Cover Set.  Detachable Shade Cover, Head Cover,  Arm Cuff Cover, New Arm Strap

• Aussie Green Digital Camo pattern with thin neoprene lining to protect your detector.  Thin neoprene protects your detector from direct sunlight that can cause the detector to overheat and have screen black out.

• NEVER! NEVER! NEVER! Buy a BLACK COVER or a cover that does not use an insulated lining or speaker mesh.  Black or dark fabric covers that do not provide adequate heat protection and ventilation can be harmful to your machine. 

• Comfortable Arm Cuff, with just the right amount of padding, color coordinated arm strap. 

• Easily access the connection points in rear. Elastic band to hold charging cable in place.  Mesh over speaker to provide clear undistorted sound.  The mesh is also very important to keep the detector ventilated to avoid overheating. Cover does not obstruct flashlight like some cheap covers.

If you find a better well made, feature rich cover than Nugget Stalker® Brand, I recommend you buy it.

The post Equinox 700 / 900 Cover Set, Doc’s Nugget Stalker® Brand appeared first on Doc's Detecing Supply.